Extras

through unique OEM relationships

• ¾”-wide pre-cut banding material with integrated seal.
• Standard lengths are 22”, 32” and 42” and can have either a 1” - long closed back seal or a 7/8” - long overlap back seal.
• Can be made of .020”x3/4”,.025”x3/4” and others, banding material in 304 and 316L grade Stainless Steel, Monel 400 and High-Tensile Painted Carbon Steel.

• The SO Set III is a single-grip, compression-set, retrievable mechanical production packer that is suitable for most production, stimulation, and testing applications.
• The packer sets with 1/3 right hand turn and is retrieved with straight pick-up.

• Desanders are solid control equipment with a set of hydro cyclones that separate sand and silt from the different fluids.
• Centrifugal action separates solids; the particles settle by gravity into the bull-plugged mud anchor joints.

• 316L stainless steel tube; wall thickness: 0.71mm (0.028"); O.D:6.35mm(0.250") nominal
• 100 Ohms impedance (± 10 ohms)
• #18 AWG 7/0.39mm tin coated copper; O.D: 1.16mm(0.046") nominal

Check valves are unidirectional valves that provide unobstructed flow in one direction as long as flow pressure remains constant and protect the piping system against reverse flow.

• Tubing drains allow you to reliably drain the production tubing before pulling out of a hole.
• This prevents the process of pulling wet tubing, which is difficult and not environmentally friendly.
• Once on a surface, the tubing drain can be redressed for future use.